Overview
The 13128 is a long rear add-a-leaf kit sold as a pair. It is made for trucks that need 1.5 to 2.5 inches of raised rear height. It strengthens an existing leaf spring pack when springs are worn or carry heavy loads. It covers Ford Bronco, F-100, F-150, F-250, F-350 and Excursion models from 1973 to 2006.
Key features
- Long add-a-leaf design
- Sold as a pair
- Rear position
- Raises rear height 1.5 to 2.5 inches
Driveline and rear geometry
Raising the rear of a truck tilts the axle and changes the angle of the driveshaft. Excess angle can cause vibration, premature U-joint wear and clicking on turns, while too little can make a slight shake. Measuring the angles before and after the change helps decide whether the driveshaft needs attention.
The long add-a-leaf increases support along the length of the pack, which can help a sagging rear but also firms the ride. Look at the spring pack, shackles and bushings before installation, and replace any that show wear, since a pair of kits will only perform as well as the springs underneath.
Check the rear shocks after raising the vehicle, because their mounts and extension change. Brake lines and the parking brake cable can also be stretched by the new height, so inspect them while the truck is raised.
- Measure driveshaft angles after lifting
- Inspect U-joints for wear
- Check brake line slack
- Inspect shackles and bushings
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13128 |
| UPC | 614901140118 |
| Position | Rear |
| Type | Long |
| Sold as | Pair |
| Lift range | 1.5 to 2.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It covers 1978–1996 Ford Bronco models, 1973–1996 Ford F-100, F-150, F-250 and F-350 trucks, 1997–2006 Ford F-250 and F-350 Super Duty trucks, and 2000–2005 Ford Excursion models, in the trims covered for each model.
Other years and Ford models are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The add-a-leaf joins the existing rear spring pack, so the pack should be inspected before installation. Driveline angles should be checked once the rear is raised.
What’s included
- Pair of long rear add-a-leaf kits









