Overview
The Pro Comp pitman arm, part number FD600, is a drop pitman arm with a 4 inch drop, installed in the front position. Pro Comp Suspension designs it for lifted trucks, where the drag link attachment point must move down to reduce link angle and keep steering correct.
When a truck is lifted, the drag link has to move down to keep its angle low, which is why a drop pitman arm is used. This arm is made for power steering systems. The UPC for this part is 614901118001.
Key features
- 4 inch drop
- Front position
- Designed to reduce drag link angle on lifted trucks
- Made for power steering systems
Steering and drag link geometry
On a lifted truck, the drag link runs at a steeper angle than the factory setup intended, and that angle affects how the steering responds and how much the link moves through its arc. Dropping the attachment point with a drop pitman arm helps keep the link closer to its original geometry. The change also alters steering box position, so steering feel can shift and should be checked.
When you replace a pitman arm, the steering box shaft is the part that needs attention. Look for play in the splines, a loose nut or any sign of wear on the taper. Old tie rod ends and drag link joints are often replaced at the same time, since worn joints make a new arm feel loose and can cause uneven tire wear.
- Check the drag link and tie rod ends for play
- Recheck toe after the arm and links are installed
- Inspect the steering box for leaks and wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | FD600 |
| UPC | 614901118001 |
| Type | Pitman arm |
| Amount of drop | 4 inches |
| Position | Front |
| Steering type | Power steering |
Vehicle fitment
The arm is made for power steering systems, so confirm the steering type and lift height before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Remove the factory pitman arm with a puller, and check the steering box shaft for wear before fitting the new arm. Check the steering alignment and the drag link angle once the arm is installed.
What’s included
The pitman arm is sold by itself, with no other parts included.








