Overview
The Pro Comp center cap 8425041 is a black two-part push thru cap with a 4.25 inch center bore. It fits Pro Comp wheels with part numbers ending in 83 and 85.
It fits 5×5.5 and 6×5.5 bolt patterns. Because fit depends on bore, pattern and part number, check all three on your wheel before ordering.
Key features
- Black finish
- Two-part push thru design
- 4.25 inch center bore
- Matches wheel part numbers ending in 83 and 85
Before you buy
A center cap covers the hub and lug nuts, so its job is mostly visual and protective. The cap sits in the wheel’s center bore, which is why the bore size and the wheel’s part number need to match before you order. A cap that is too loose can rattle or work out over rough roads, while one that is forced in can crack the plastic or scratch the finish.
Before buying, look at the wheel itself. Note the part number stamped or printed on the back face and measure the open center. Check whether your wheel has a raised hub ring, since some caps seat against it. If you plan to run new wheels later, check the cap fit again at that time, because a wheel change may need a different cap.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 8425041 |
| UPC | 844658008595 |
| Type | Center cap, two-part push thru |
| Finish | Black |
| Center bore | 4.25 in |
| Bolt patterns | 5×5.5 and 6×5.5 |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check the bore, bolt pattern and wheel part number on your wheel first.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One two-part black push thru center cap.




















