Overview
The Pro Comp 7515041 is a chrome two-part plastic push thru cap with a 5.15 inch center bore. It fits Pro Comp wheels with part numbers ending in 70 and 82.
It fits 8×6.5, 8×170 and 8×180 bolt patterns. Because fit depends on bore, pattern and part number, confirm all three on your wheel before ordering. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Chrome finish
- Two-part plastic construction
- Push thru style
- 5.15 inch center bore
Plastic caps under load
Two-part plastic caps are lighter than metal ones and resist corrosion, but plastic reacts differently to heat and impact. Brake heat can soften the surface near the hub, and a sharp strike from a stone can crack the edge. Look for discoloration or small cracks after hard braking or rough trail use, since these signs mean the cap may need replacing.
When cleaning, use a mild soap and avoid petroleum-based products that can soften some plastics. Fit matters more with plastic than with metal because the edge can deform if forced in. Press the cap in by hand or with a flat block rather than a hammer, and confirm it sits flat before driving.
- Inspect the edge after hard braking
- Clean with mild soap, not petroleum solvents
- Press in by hand rather than striking it
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 7515041 |
| UPC | 844658006065 |
| Type | Center cap, two-part push thru |
| Material | Plastic |
| Finish | Chrome |
| Center bore | 5.15 in |
| Bolt patterns | 8×6.5, 8×170 and 8×180 |
Vehicle fitment
Check the bore, bolt pattern and wheel part number before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One two-part chrome plastic push thru center cap.












