Overview
The Pro Comp center cap 502932700 is a satin black push thru cap with a 3.27 inch center bore, from Pro Comp Alloy Wheels. It fits 5×4.5 and 5×5 bolt patterns and is a closed design.
No wheel series or vehicle is named for this cap. Measure the center bore on your wheel and confirm the 5×4.5 or 5×5 pattern before ordering.
Key features
- Satin black finish
- Push thru design
- Closed cap
- 3.27 inch center bore
Center bore and seating
The center bore is the opening the cap sits in, so its diameter sets the basic fit. A push thru cap relies on a snug press rather than threads, which means a bore that is slightly out of round or full of paint can keep it from seating flush. Clean the bore with a soft brush and check that the cap goes in evenly on all sides before driving. Uneven seating can cause a cap to pop out on rough pavement.
Satin black finishes are less glossy than gloss black and tend to hide light scuffs and road film, which suits daily driven wheels. Over time, check the cap for fading, chips in the coating, or softened edges, particularly after exposure to road salt or harsh cleaners. Wash with a pH-neutral soap, and if a cap is cracked or no longer fits the bore, replace it before it falls out at speed.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 502932700 |
| UPC | 844658026513 |
| Type | Center cap, push thru, closed |
| Finish | Satin black |
| Center bore | 3.27 in |
| Bolt patterns | 5×4.5 and 5×5 |
Vehicle fitment
Check the 3.27 inch bore and the 5×4.5 or 5×5 bolt pattern on your wheel before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One satin black push thru center cap.









