Overview
The Pro Comp Alloy Wheels 6051 center cap, part number 805132700, is a satin black cap measuring 3.27 inches. It is a push-through style, pressed into the wheel center.
At 3.27 inches, this is the smallest of the satin black 6051 caps in this group. No vehicle is named for it, so measure the center bore of your wheel before buying.
Key features
- Satin black finish
- 3.27-inch diameter
- Push-through design
Choosing a replacement cap
A center cap covers the hub bore and keeps dirt, water and road grime out of the wheel center. It also carries the wheel’s finish toward the middle of the rim, so a cap that differs in tone from the rest of the wheel stands out. When choosing a replacement, the diameter and the way the cap seats matter more than anything else. A cap that is too small will rattle or fall out over rough ground, and one that is too large will not seat against the rim.
A push-through cap like this one is pressed into the center bore and held by friction and a small lip. Once seated it should sit flush with the wheel face. Before installing, clean the bore and check for burrs or paint built up around its edge, since either can keep the cap from seating fully.
- Check the center bore before buying
- Compare finish in daylight with the other caps
- Inspect for cracks after rough trail use
- Replace caps that have worked loose
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 805132700 |
| UPC | 844658034372 |
| Finish | Satin black |
| Diameter | 3.27 inches |
| Style | Push-through |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Match the 3.27-inch diameter to the center of your 6051 style wheel.
What’s included
One center cap is described. No package quantity is given.









