Overview
The Pro Comp center cap 502934200 is a satin black push-style cap with a 3.42 inch center bore, from Pro Comp Alloy Wheels. It is a snap in, closed design with a 6×135 bolt pattern.
Because the cap is sized to the center bore, measure the opening on your wheel and confirm the 6×135 pattern before ordering.
Key features
- Satin black finish
- Push style, snap in
- Closed cap
- 3.42 inch center bore
Snap in caps and fit
A snap in center cap relies on a snug fit in the bore and a retaining lip that catches the wheel edge. Because the fit is mechanical, the bore diameter is the main thing to get right. A satin finish reduces glare and hides light handling marks better than a high gloss surface, which makes it a practical choice for daily driving.
Before installing, clean the bore and the cap edge so dirt does not prevent a secure seat. Press the cap evenly with the palm of your hand, working around the edge. If it sits proud or wobbles, remove it and check for debris or a bent lip rather than forcing it.
Snap in caps are often lost on rough roads when the lip wears or the wheel bore has grown from repeated impacts. Check the lip and the bore when rotating tires, and replace the cap if it no longer locks in place. Keeping a spare cap in the vehicle can be a simple way to avoid losing one on the trail.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 502934200 |
| UPC | 844658026506 |
| Type | Center cap, push style, snap in, closed |
| Finish | Satin black |
| Center bore | 3.42 in |
| Bolt pattern | 6×135 |
Vehicle fitment
Confirm the 3.42 inch center bore and the 6×135 bolt pattern on your wheel before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One satin black snap in center cap.












