Overview
The Pro Comp center cap is a black snap-style cap with a 3.42 inch center bore. It fits Pro Comp wheels with part numbers ending in 35, 36 and 38 and a 6×135 bolt pattern.
The product name has no part number, so match the cap to your wheel by bore, bolt pattern and the wheel’s part number before ordering. No vehicle is named.
Key features
- Black finish
- Snap style cap
- 3.42 inch center bore
- Fits a 6×135 bolt pattern
Keeping a snap cap seated
A snap style cap uses clips that grip the inside of the bore, so its hold depends on the clips staying straight and the bore staying round. Wheels that have been trimmed, machined or repainted in the center can change the bore edge slightly. Check the seating after any wheel work, and make sure the cap sits flat against the wheel face.
Dirt that builds up behind the clips can keep the cap from seating fully. Clean the bore area during tire rotations and inspect the clips for flattening. A black finish hides dust well, but loose caps can rattle, so listen for noise on rough roads and reseat or replace the cap as needed.
- Clean the bore area during tire rotations
- Check clips for flattening or cracks
- Reseat the cap after any wheel repair
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| UPC | 844658006102 |
| Type | Center cap, snap style |
| Finish | Black |
| Center bore | 3.42 in |
| Bolt pattern | 6×135 |
| Wheel match | Part numbers ending in 35, 36 or 38 |
Vehicle fitment
Confirm the 3.42 inch bore and the 6×135 pattern on your wheel before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One black snap-style center cap.









