Overview
The Pro Comp 2.5 inch rear lift block, part number 95-250FB, is a tapered cast iron riser block that lifts the rear of the vehicle 2.5 inches. It is sold as a pair.
The taper is designed to improve driveshaft angle. Confirm your vehicle’s year, model and trim before ordering.
Key features
- 2.5-inch rear lift
- Cast iron riser block
- Tapered design meant to improve the driveshaft angle
- Sold as a pair
Driveline after a rear lift
A rear riser block raises the axle relative to the frame, which changes the angle of the driveshaft and can add vibration at highway speeds. The taper is intended to address that angle change. Cast iron adds weight and stiffness at the mounting point, so the bolts should be checked for tightness after installation.
Inspect U-joints, slip yokes and pinion angle at the same time as the block install. Spring pins and shackle hardware can loosen as the lift settles, so a short check after the first drives helps catch problems early. Pay attention to vibration, clunks or a shuddering driveline, which point to the angle still being wrong.
- Recheck block bolt torque after the first drives
- Measure driveshaft angle before and after
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 95-250FB |
| UPC | 614901133134 |
| Position | Rear |
| Lift | 2.5 inches |
| Material | Cast iron |
| Shape | Tapered |
| Quantity | Pair |
| Make named | Ford |
Vehicle fitment
It is sold as a universal fit block and carries a Ford marking. Check your make, model and year before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A lift block changes the driveline angles. The tapered shape is meant to improve the driveshaft angle, but check driveline angles and alignment after the block is installed.
What’s included
A pair of 2.5 inch rear lift blocks. Check the package contents against your installation before starting.






