Overview
The Pro Comp Suspension 51423 is a 4 inch rear leaf spring for the 1987–1995 Jeep Wrangler (YJ). It is a single spring, sold each for the driver or passenger side, so a rear pair takes two units. Bushings are not included with the spring.
The spring uses diamond-cut multi-leaf construction, which Pro Comp says adds clearance and improves ride quality. A 4 inch rear lift changes the rear driveline geometry, so the pinion angle should be checked after installation.
Key features
- 4 inch lift rear leaf spring
- Diamond-cut multi-leaf construction
- Sold each for the driver or passenger side
- Fits the 1987–1995 Jeep Wrangler YJ
Driveline after a rear lift
A rear lift changes the pinion angle, which affects the driveshaft, U-joints and vibration at highway speed. The angle should be measured after the spring settles, and the driveshaft should be inspected for wear at both joints.
Brake lines, the parking brake cable and the rear shocks all work at new lengths after a rear spring change. Look over the lines for stretch and check that the shocks still have full travel without bottoming out.
Because the spring sits at a new height, the bump stops and rear track should also be checked. Settle the vehicle on level ground before measuring the pinion angle and tightening the hardware.
- Measure pinion angle after install
- Inspect driveshaft U-joints
- Check brake lines and shock travel
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 51423 |
| UPC | 614901140460 |
| Position | Rear |
| Lift height | 4 inch |
| Spring quantity | Single spring |
| Bushings | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
TJ, LJ and later Wrangler generations are not covered by this spring. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the bushings are not included, reuse the existing bushings only if they are in good condition, or fit new ones that match the spring eye and hanger. Check the pinion angle after the spring is installed.
What’s included
One rear leaf spring for the driver or passenger side.
Not included: bushings.









