Overview
The Pro Comp Suspension 13311 is a 4 inch rear leaf spring for Chevrolet and GMC full-size trucks and Suburbans from 1973 to 1991. It is a single spring that replaces the stock rear leaf on the listed models, and it is sold as one spring per order.
The spring is diamond-cut multi-leaf, which Pro Comp says gives additional clearance and a better ride than the stock leaf. Polyurethane bushings are part of the design, and the 4 inch lift is the height it is meant to deliver.
Key features
- 4 inch lift rear leaf spring
- Diamond-cut multi-leaf construction
- Polyurethane bushings
- Single spring, sold each
- Fits K10, K20, K30, K1500 and K2500 Chevrolet and GMC trucks, plus Suburban and Blazer models
Before installing a rear spring
A rear leaf spring carries the axle’s load and sets the rear ride height. When it is replaced, the axle sits in a new position, which changes the pinion angle and driveline geometry. Shock absorber length and mounting also need a check, since a taller spring extends shock travel.
Most leaf spring jobs also involve the shackles, hangers and U-bolts. Replacing the bushings at the same time keeps the spring centered and reduces squeaks. Look for sag at the rear of the frame, a truck that sits unevenly from side to side, or leaves that show cracks. Retorque U-bolts after the first few drives and check them periodically.
- Inspect shock absorbers for leaks and length
- Check the driveline angle and U-bolt torque
- Replace worn shackles and hangers together
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13311 |
| UPC | 614901133110 |
| Position | Rear |
| Lift height | 4 inch |
| Spring quantity | Single spring |
| Bushings | Polyurethane |
| Spring length | 52 in. |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1973–1991 Chevrolet and GMC trucks, including K10, K20, K30, K1500 and K2500 pickups, V10 through V3500 trucks, Suburbans, K5 Blazers, Jimmy models and GMC Sierra variants. Confirm fit for your vehicle’s year, model and trim before ordering.
Chevrolet and GMC trucks from 1992 onward are not covered by this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A rear leaf spring change affects the pinion angle and the driveline, so check the angle after installation. Use the spring’s polyurethane bushings with the shackle and hanger hardware for a tight fit.
What’s included
One rear leaf spring with polyurethane bushings.








