Overview
The Pro Comp Suspension 51222 is a 2.5 inch rear leaf spring for the 1976–1983 Jeep CJ5 and the 1976–1986 Jeep CJ7. It is sold each for the driver or passenger side, and it includes polyurethane bushings. Pro Comp rates the spring at 2.5 inches of lift.
The diamond-cut multi-leaf design adds clearance and improves ride quality. Because it is sold one side at a time, two springs are needed for a complete rear pair.
Key features
- 2.5 inch lift rear leaf spring
- Driver or passenger side, sold each
- Polyurethane bushings included
- Diamond-cut multi-leaf construction
Rear axle changes on a lift
A rear leaf spring sets the position of the axle under the body. Changing it alters the pinion angle, which affects driveshaft vibration and wear on the pinion bearings. The rear shock absorbers and brake lines may also need attention, because the axle moves relative to the frame at the new ride height.
Because this spring is sold one side at a time, a rear pair means buying two units, so match the driver and passenger sides carefully. Check the shackle and hanger hardware at installation, and look for worn bushings or cracked leaves over time. Retorque the U-bolts after a short drive and re-check them during regular maintenance.
- Check the driveline angle
- Inspect shock absorbers for leaks
- Confirm the spring is the correct side
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 51222 |
| UPC | 614901140354 |
| Position | Rear |
| Lift height | 2.5 inch |
| Spring quantity | Single spring, sold each |
| Bushings | Polyurethane, included |
| Fitment type | Direct fit |
Vehicle fitment
The 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited and Renegade) and 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade) are the models this rear spring covers.
Earlier CJ models and the Wrangler are not part of this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear springs change the pinion angle, so check the driveline angle after installation and confirm the shackle and hanger hardware fits the new spring.
What’s included
One rear leaf spring for the driver or passenger side, with polyurethane bushings.








