Overview
The Pro Comp 76407P is a pair of square 2×2 LED spot lights rated at 3W, finished in black and sold as a light pod kit. It belongs to Pro Comp’s Explorer Series of LED lights, which the company designs for off-road use on trucks, Jeeps and SUVs.
The spot beam is meant for focused forward light. Pro Comp says Explorer Series lights deliver high lumens per watt, carry a 50,000+ hour life span, and use an IP67 housing with a shockproof 3800 polyester powder coat case.
Key features
- 3W LED spot beam in a square 2×2 pod
- 50,000+ hour life span
- IP67 housing with shockproof 3800 polyester powder coat case
- Clear lens
- Wiring harness, switch and relay included
- Two sets of mounting brackets and hardware
Spot beam range and placement
A spot beam concentrates light into a narrow forward pattern, so it reaches farther down a trail or dirt road than a flood. It is useful for scanning for obstacles and reading the track ahead at speed, but it leaves the sides of the trail dim. Many drivers mount spots higher on a roof or bar and pair them with a wider light for near-field coverage.
Placement affects how well a spot works. Mount the pods where the beam is not blocked by the bar or hood, and keep the lens free of dust and insects, since a dirty lens cuts the reach of a narrow beam. Check the wiring route before tightening brackets, and wire the relay through a fuse so the lights switch cleanly with the dash switch.
- Choose a height that clears low branches
- Aim slightly down for ground-level reach
- Clean the lens before night trips
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 76407P |
| UPC | 844658036253 |
| Light type | LED spot, light pod |
| Power | 3W |
| Light shape | Square |
| Size | 4 inch |
| Lens | Clear |
| Housing | IP67, shockproof 3800 polyester powder coat case |
| Mounting | Bracket |
| Finish | Black |
| Sold as | Kit (pair) |
Vehicle fitment
Pro Comp lists these light pods as universal fit, so they are not built for one vehicle. Choose a mounting position that gives a clear view of the road and clears the housing and wiring.
A spot beam is narrower than a flood beam, so it suits a focused forward view rather than wide side coverage. Confirm your vehicle’s year, model and trim before ordering the mounting hardware.
Installation notes
Each pod ships with a wiring harness, switch and relay, so wire them to a switched source through a fuse. Check local rules for auxiliary lights before using them on public roads.
What’s included
A pair of square LED spot light pods, a wiring harness, a switch, a relay, and two sets of mounting brackets with hardware.




























