Overview
The Pro Comp PLN09104 is a 2 inch poly lift strut spacer kit for the front of a vehicle, rated for a maximum tire size of 33×12.50. It gives added height for oversize tires while keeping the ride comfort close to stock. The kit is front only and is made of black polyurethane.
Poly lifts are one of the simplest ways to gain the extra height needed to clear oversize tires. Pro Comp lists longer shocks as recommended with this kit, and the track bar drop is not included.
Key features
- 2 inch front lift from strut spacers
- Maximum tire size of 33×12.50
- Polyurethane spacer material
- Front lift only
- Black finish
Tire size and suspension balance
A 2-inch strut spacer on the front gives room for larger tires, but the suspension and steering need to handle the extra diameter. Tire width, offset and backspacing decide how close the tire gets to the fender and the control arms. Measuring those clearances before buying tires avoids rubbing at full lock and under compression.
Front-only lifts increase the height difference between the ends of the truck, so the rear should be checked for comfortable ride height under normal loads. Longer shocks help the damper work through its range at the new height, which is why shock length is worth reviewing when the spacers go in. Replacing tired shocks at the same time is a common step.
- Measure tire clearance at full steering lock
- Check shock length at the raised front height
- Set alignment after installing the spacers
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PLN09104 |
| UPC | 614901127515 |
| Lift height | 2 inch |
| Maximum tire size | 33×12.50 |
| Front lift method | Strut spacers |
| Rear lift | Front lift only |
| Spacer material | Polyurethane |
| Finish | Black |
| Track bar drop | Not included |
| Bump stops | None listed |
Vehicle fitment
Confirm fit for your vehicle’s year, make, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Longer shocks suit this strut spacer, so check shock length against the raised front ride height during installation.









