Overview
The Power Stop K6258-36 is a front Z36 Truck and Tow drilled and slotted brake kit for the 2012–2018 Chevrolet Silverado 2500 HD and 3500 HD, the 2016–2018 Chevrolet Suburban 3500 HD and the 2012–2018 GMC Sierra 2500 HD and 3500 HD. It is a disc brake pad and rotor kit, also called a brake kit, and it is named a 1-Click kit in its title.
Heavy-duty braking for trucks is the focus here, with improved braking capability when roads are wet, hot or hilly, or when towing at maximum weight. The rotors are slotted and cross drilled, and the pads are Z36 high-friction metallic. Calipers are not part of this kit. A drilled rotor has holes through its friction face and a slotted rotor has grooves cut across it, so this rotor combines both patterns. The kit is a front-axle kit.
Key features
- Slotted and cross-drilled rotors are matched with Z36 high-friction metallic pads in one front kit.
- Power Stop aims the Z36 line at heavy-duty trucks and towing.
- The rotors are coated.
- Calipers are left off, so the truck’s existing calipers carry on in service.
- Power Stop gives the fitment type as direct fit.
- Front axle position only.
Towing and heavy-duty front brakes
Heavy-duty trucks put more load on front brakes when towing or driving down long grades, and the brakes absorb that energy as heat. Slotted and cross-drilled rotors help move gas, water and debris from the pad face, while high-friction pads supply the bite needed at heavy weight. Good brake performance also depends on fluid condition, hoses and calipers, which this kit does not replace.
Because the calipers stay in place, check their slide pins and piston boots when fitting new pads and rotors. A stuck caliper can drag pads into the rotor and cause heat, noise and uneven wear.
- Check brake fluid condition at service
- Inspect hoses for cracks or swelling
- Replace pads and rotors as a matched pair
- Bed in pads gradually before towing
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K6258-36 |
| UPC | 700007310111 |
| Product type | Drilled and slotted brake kit without calipers |
| Series | Z36 Truck and Tow |
| Brake position | Front |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Power Stop Z36 high-friction metallic pads |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits these Chevrolet and GMC heavy-duty trucks, with trims shown for each:
- 2012–2018 Chevrolet Silverado 2500 HD (High Country, LT, LTZ, WT)
- 2012–2018 Chevrolet Silverado 3500 HD (High Country, LT, LTZ, WT)
- 2016–2018 Chevrolet Suburban 3500 HD (LS, LT)
- 2012–2018 GMC Sierra 2500 HD (Base, Denali, SLE, SLT, WT)
- 2012–2018 GMC Sierra 3500 HD (Base, Denali, SLE, SLT, WT)
Other model years of these trucks fall outside this kit’s coverage. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the K6258-36 is a front-axle kit without calipers, expect to work on the front brakes only and to reuse the calipers already on the truck. Pads and rotors from a matched kit are normally replaced together.
What’s included
Slotted and cross-drilled rotors and Power Stop Z36 high-friction metallic pads for the front axle.
Not included: Calipers.








