Overview
The Power Stop K3090-36 is a rear Z36 Truck and Tow brake kit, with slotted and cross-drilled rotors, for the 2007–2012 and 2015–2018 Jeep Wrangler JK in both 2-door and 4-door form.
This is a rear Z36 Truck and Tow kit: drilled and slotted rotors paired with Z36 high-friction metallic pads, made for wet, hot and hilly roads and for towing at maximum weight. It is a rotor-and-pad set without calipers, so the Wrangler’s existing calipers are reused. The rotors and pads are sold as a matched set, so they are designed to work together rather than being mixed from different sources.
Key features
- Slotted and cross-drilled rotors for use under load
- Z36 Truck and Tow high-friction metallic brake pads
- Intended for wet, hot and hilly roads and for towing at maximum weight
- Direct-fit design matched to the listed vehicles
- Kit is supplied without calipers
- Brake lines are not part of the kit
Keeping rear brakes balanced
Wrangler JK rear brakes often get less attention than the fronts, yet they handle a large share of braking when the vehicle is loaded or towing on grades. Because the calipers stay in place with this kit, the new rotors and pads need to sit square against the caliper and the hub face. A small amount of rust or debris on the hub can cause runout and pulsing.
Off-road use adds dust, water and mud to the rear brakes. Rinse the wheels after wet trail runs, and check the rotor surface for scoring from grit. Keep the parking brake adjusted, since a dragging rear shoe or caliper can wear new pads quickly on any JK.
- Clean the hub face before fitting new rotors
- Rinse brake components after wet trail use
- Check parking brake adjustment during service
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K3090-36 |
| UPC | 70000689028 |
| Brake position | Rear |
| Rotor type | Slotted and cross-drilled |
| Brake pads | Z36 Truck and Tow high-friction metallic |
| Rotor coating | Coated |
| Calipers | Not included |
| Brake lines | Not included |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2007–2012 and 2015–2018 Jeep Wrangler JK in 2-door and 4-door form, including the Sport, Sahara, Rubicon and Unlimited versions and the 70th and 75th Anniversary editions. It is a rear kit only.
The list skips the 2013 and 2014 model years and does not include the TJ, LJ or JL Wrangler. This is a rear kit; a front axle needs a separate kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a direct-fit pad and rotor kit, so it replaces the factory rotors and pads without modification. It contains no calipers, and the existing calipers stay on the vehicle. Change the rotors and pads on both wheels of an axle together so braking stays even side to side.
What’s included
Slotted and cross-drilled rotors and Z36 Truck and Tow metallic brake pads.
Not included: calipers and brake lines.









