Overview
The Power Stop K5575-36 is a Z36 Severe-Duty Truck and Tow 1-Click brake kit for the front and rear of the 2010–2011 Ford F-250 Super Duty and F-350 Super Duty.
The set carries slotted, cross-drilled rotors and Z36 high-friction metallic pads for all four wheels of these pickups, with no calipers. Matching pads and rotors in one box is the idea behind Power Stop’s kit approach, which the company describes as a way to get a big brake feel without a big brake conversion. Power Stop also claims low noise and dust alongside the extra bite.
Key features
- Z36 Truck and Tow pads use a high-friction metallic compound
- Rotors are both slotted and cross-drilled
- Power Stop aims this kit at heavy-duty braking and trailer or load hauling
- Direct fit, so no modification is described
- Rotors arrive coated
- No calipers and no brake lines are included
Four-wheel brake planning
Replacing brakes on all four wheels calls for a plan that covers each axle, the hardware between them, and the time to bed in the new parts. Heavy-duty pads perform best when they are seated against fresh rotor faces, so the break-in process matters as much as the part itself.
Between brake jobs, keep an eye on the fluid level and the condition of the hoses. Look for a soft pedal, pulling to one side, or a vibration under braking, since these can point to a problem in the brake system rather than the pads. Clean the wheel hubs and check the lug nut torque after the first trip.
- Bed in pads gradually before heavy towing
- Check fluid level and hose condition
- Watch for pulling or vibration under braking
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K5575-36 |
| UPC | 700007476681 |
| Brake position | Front and rear |
| Rotor type | Slotted and cross-drilled |
| Brake pads | Z36 Truck and Tow high-friction metallic |
| Rotor coating | Coated |
| Calipers | Not included |
| Brake lines | Not included |
| Fit type | Direct fit |
Vehicle fitment
The kit fits the 2010–2011 Ford F-250 Super Duty and the 2010–2011 Ford F-350 Super Duty.
The 2009 F-250 and 2012 and newer Super Duty trucks are not covered by this part number. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The kit is direct fit and replaces the original rotors and pads. The calipers already on the truck are reused. Fit both wheels on an axle at the same time.
What’s included
A set of slotted and cross-drilled rotors with Z36 metallic pads.
Not included: calipers and brake lines.









