Overview
The Power Stop K1798-36 is a rear Heavy Duty Truck and Tow brake kit for the 2007–2010 Ford F-250 Super Duty and F-350 Super Duty. It pairs slotted and cross-drilled rotors with Z36 high-friction metallic pads and has no calipers.
The Z36 line suits trucks that face wet, hot or hilly roads and maximum-weight towing. The K1798-36 covers the rear axle, has coated rotors, excludes brake lines and is a direct-fit kit. Other rear kits from this line cover different model years, so match the years carefully. Cross-drilled rotors have holes through the friction face and slotted rotors have grooves, and the K1798-36 uses both. The Z36 pads are designed for towing and heavy loads.
Key features
- Rear-axle kit with slotted and cross-drilled rotors.
- Z36 high-friction metallic pads.
- Coated rotors.
- The F-250 and F-350 Super Duty are covered for 2007–2010.
- No calipers or brake lines.
Rear axle heavy-duty setup
A rear-only kit suits a truck where the front brakes are in good shape and only the rear pads and rotors need replacing. Rear brakes on loaded trucks take a steady share of stopping work, so inspect them at each service interval. Before buying a rear set, confirm the model year and axle position, since several rear Z36 kits cover different years.
Z36 high-friction pads are built for towing and heavy loads, and they usually need a proper bed-in procedure before they reach full stopping power. Expect more dust and some noise than with standard pads, especially when cold. Slotted and cross-drilled rotors shed water and heat differently, so keep the rotor face clean and check for glazing after a few weeks of use.
- Confirm model year and axle position
- Bed in Z36 pads gently before towing
- Check caliper and brake line condition
- Replace rear rotors and pads as a set
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1798-36 |
| UPC | 792088564658 |
| Product type | Heavy duty truck and tow brake kit without calipers |
| Brake position | Rear |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Z36 high-friction metallic pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2010 Ford F-250 Super Duty and F-350 Super Duty, with the trims below.
- 2007–2010 Ford F-250 Super Duty (Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
- 2007–2010 Ford F-350 Super Duty (Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
Super Duty years before 2007 and after 2010 fall outside this kit’s coverage. Verify your year, model and trim before ordering.
Installation notes
The K1798-36 is for the rear axle alone. Rear rotors and pads change as a pair set, and the existing calipers and brake lines are retained.
What’s included
The K1798-36 contains slotted and cross-drilled rotors and Z36 high-friction metallic pads for the rear axle.
Not included: Calipers and brake lines.









