Overview
The Power Stop K2003 is a rear Z23 Evolution Sport performance brake upgrade kit for the 1997–2005 Chevrolet Blazer, the 1998–2003 Chevrolet S10, the 1997–2001 GMC Jimmy, the 1998–2003 GMC Sonoma, the 1998–2000 Isuzu Hombre and the 1997–2001 Oldsmobile Bravada. It pairs drilled and slotted rotors with carbon fiber infused ceramic pads.
The Z23 kits pair carbon fiber-infused ceramic pads with drilled and slotted rotors made with Tru-Cast technology. The rotors are coated, brake lines are not included and it is a direct fit. The six vehicles it covers are related compact trucks and SUVs from General Motors and its partners. Years differ by model, so check each range. A drilled rotor has holes through its friction face and a slotted rotor has grooves cut across it, and the K2003 uses both patterns.
Key features
- Rear kit for six GM-built compact trucks and SUVs.
- Evolution drilled and slotted performance rotors.
- Premium hardware, a pin bushing kit and Hi-Temp lubricant.
- Slots increase pad bite and clean the pad surface.
- Holes and slots clear debris, dust, gases and water.
- Drilled rotors reduce rotor weight.
- The ceramic pads include premium shims and powdercoated backing plates.
Carbon ceramic pads explained
Carbon fiber infused ceramic pads aim for a quiet, low-dust stop in everyday driving. They usually need a few moderate stops to build a transfer layer on the rotor before they feel their strongest. Cold brakes can feel softer, so drive gently for the first few miles.
The drilled and slotted rotors help shed heat, gases and water from the friction surface. Holes and slots can wear pads a little faster than plain rotors, which is a trade-off worth knowing about. Silver zinc plated rotors resist surface rust while parked outdoors.
The included premium hardware, pin bushing kit and Hi-Temp lubricant keep the caliper moving smoothly. Lubricate the slide pins and bushings during the job, and check the boots for tears. Sticking slides cause uneven pad wear on a rear axle.
- Lubricate slide pins with the supplied lubricant
- Check boots for tears
- Bed in pads gradually
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K2003 |
| UPC | 792088527714 |
| Product type | Performance brake upgrade kit |
| Series | Z23 Evolution Sport |
| Brake position | Rear |
| Rotor type | Slotted and cross drilled, silver zinc plated, coated |
| Brake pads | Z23 Evolution Sport carbon fiber infused ceramic |
| Hardware | Premium hardware, pin bushing kit and Hi-Temp lubricant |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the six Chevrolet, GMC, Isuzu and Oldsmobile models below, in the trims shown.
- 1997–2005 Chevrolet Blazer (Base, LS, LT, ZR2)
- 1998–2003 Chevrolet S10 (Base, LS, ZR2, ZR5)
- 1997–2001 GMC Jimmy (Diamond Edition, Envoy, SL, SLE, SLS, SLT)
- 1998–2003 GMC Sonoma (SL, SLE, SLS)
- 1998–2000 Isuzu Hombre (S, XS)
- 1997–2001 Oldsmobile Bravada (Base)
Years outside each listed range, and other GM models, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The K2003 covers the rear axle and includes premium hardware, a pin bushing kit and Hi-Temp lubricant. Replace the rear rotors and pads together and keep the brake lines already fitted.
What’s included
The K2003 contains Evolution drilled and slotted rotors, Z23 Evolution Sport ceramic pads, premium hardware, a pin bushing kit and Hi-Temp lubricant for the rear axle.
Not included: Brake lines.









