Overview
The Power Stop Z36-1109 is a set of rear Z36 Truck & Tow brake pads with hardware for the 2006–2010 Ford Explorer, the 2008–2010 Ford Explorer Sport Trac and the 2008–2010 Mercury Mountaineer.
Power Stop offers the Z36 line for trucks, 4x4s and SUVs that work hard and play hard, from towing a boat to hauling for a jobsite or running a rough trail. The ceramic pads are low-dust and reinforced with carbon fibers, and Power Stop says premium stainless steel shims maximize heat dissipation and quiet braking on long mountain descents.
Key features
- Rear brake pads, supplied as a pair
- Carbon and ceramic formula
- Thermal-scorched surface
- Chamfered and slotted like OE
- Powder coated backing plate
- Noise-insulating stainless steel shims
- Hi-temp lubricant included
- Pad and hardware kit for bolt-on installation
Rear brake wear on SUVs
Rear brakes on a body-on-frame SUV often do less work than the fronts, so the pads can last well but may seize or stick if they are neglected. Sliding caliper pins and clip contact points are the usual trouble spots. When the rear pads are changed, inspect the caliper slides, check that the piston moves back freely and confirm that the pads sit square in the bracket.
A parking brake that drags or a pedal that feels uneven after a rear service can point to a binding caliper rather than the new pads. Rotor condition still matters at the rear, so measure thickness and look for heat spots. Bed in the new pads with a few moderate stops before any heavy braking, and recheck the bolts after the first few drives.
- Check caliper slide pins and boots
- Confirm the pads move freely in the bracket
- Measure rear rotor thickness
Specifications
| Brand | Power Stop |
|---|---|
| Part number | Z36-1109 |
| Series | Z36 Extreme Severe Duty Truck & Tow |
| Axle position | Rear |
| Fit type | Direct fit |
| Pad formula | Ceramic reinforced with carbon fibers |
| Quantity | 1 pair |
Vehicle fitment
It fits the 2006–2010 Ford Explorer, the 2008–2010 Ford Explorer Sport Trac and the 2008–2010 Mercury Mountaineer, all as rear applications.
Explorer model years before 2006 and earlier Sport Trac years are outside this fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The pad and hardware kit goes on as a bolt-on installation, and the stainless hardware included lets you replace the old rear clips.
What’s included
- Rear Z36 brake pads, one pair
- Premium stainless steel hardware
- Hi-temp brake lubricant
Not included: Rotors and front pads.








