Overview
The Power Stop K1950 is a rear performance brake upgrade kit with silver zinc plated, cross-drilled and slotted rotors and Z16 ceramic scorched brake pads. It is designed for the rear position.
The rear rotors and pads come as one matched set and are selected together. The ceramic pads are designed to provide more pad bite with less noise and dust.
Key features
- Rear-position kit with rotors and pads together.
- Silver zinc plated finish on cross-drilled and slotted rotors.
- Z16 ceramic scorched brake pads that Power Stop says produce less noise and dust.
- Matched design of pads and rotors under a single part number.
- Brake lines are not included.
Bedding in performance rear brakes
New pads and rotors need a short bedding period so the pad material transfers evenly onto the rotor face. Uneven transfer can cause vibration, reduced bite or noise, so the break-in is worth doing carefully. Moderate stops from normal speeds are the usual approach, followed by a cool-down period before any firm stops.
Cross-drilled and slotted rotors shed gas and debris, but they also place more demand on pad material, so check the rotor surface after the first few weeks of use. Inspect the rear pads for wear and the lines for leaks or chafing. Working on the rear brakes together as one set keeps the braking balance consistent.
- Use moderate stops during break-in
- Allow cool-down before firm stops
- Inspect the rear lines for leaks or chafing
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1950 |
| UPC | 792088530226 |
| Position | Rear |
| Kit type | Performance brake upgrade kit (rotors and pads) |
| Rotor type | Cross-drilled and slotted |
| Rotor finish | Silver zinc plated |
| Pad type | Z16 ceramic scorched |
| Brake lines | Not included |
| Fit type | Direct fit (no vehicles listed) |
Vehicle fitment
The rear position is the application for this kit. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake lines are not part of this kit, so your existing rear lines stay in service. Bed in the new rear pads and rotors with moderate stops, and have a technician inspect the rear brakes once the work is complete.
What’s included
Rear silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads, supplied as one matched set.
Not included: Brake lines.









