Overview
The K1944 is a performance brake upgrade kit with silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads. Confirm whether this kit covers the front, the rear or both before ordering.
The kit uses coated rotors and does not include brake lines. Holes through the friction face and grooves cut across it are both present on these rotors. The fitment is direct fit, but fit has to be confirmed against your vehicle’s year, model and trim. Related Z16 kits carry other part numbers, so match the number exactly.
Key features
- Cross-drilled and slotted rotors with silver zinc plating.
- Z16 ceramic scorched brake pads.
- Coated rotors and a direct fit are listed.
- No brake lines in the kit.
- The position is front and rear in the summary and rear in the attributes.
Confirming position and fit
Before buying a brake kit, confirm three things: the axle it covers, the vehicle year, model and trim, and the part number on the box. Mixing these up is the most common reason kits are returned. Compare the box label with the part number on the packaging and the position on the order page, and resolve any difference before the parts are installed.
Once the fit is confirmed, plan the job around the axle. Coated rotors should be cleaned of any protective coating only as far as the instructions direct, and the friction surface should be kept free of oil. Ceramic pads need a bed-in routine similar to other pads. Clean the caliper slide pins, check the boots, and replace any seized hardware before fitting, so the new pads move freely.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1944 |
| UPC | 792088530271 |
| Product type | Performance brake upgrade kit |
| Brake position | Front and rear in the product summary; rear in the attribute table |
| Rotor type | Slotted and cross drilled, silver zinc plated, coated |
| Brake pads | Z16 ceramic scorched brake pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
The kit is direct fit. Confirm its axle position and fit for your vehicle before ordering.
No vehicles are listed, so none can be ruled in or out. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Before installing the K1944, confirm whether the box holds rear parts or both axles. Replace rotors and pads together on each axle covered, and keep the existing brake lines.
What’s included
The K1944 contains silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads.
Not included: Brake lines.









