Overview
The Power Stop K5559-36 is a front Extreme Truck and Tow brake kit for the 2011 Chevrolet Silverado 2500 HD and 3500 HD and the 2011 GMC Sierra 2500 HD and 3500 HD.
This is a single-model-year fitment, with slotted and cross-drilled rotors and Z36 metallic pads for the front axle. Calipers and brake lines are not part of it. The Truck and Tow name signals the target use: heavier vehicles and loaded trips. Power Stop’s own claim is that its kits provide extra pad bite without adding noise or dust, though how this feels will depend on the vehicle and load.
Key features
- Z36 pads and drilled-and-slotted rotors supplied together as one kit
- Designed for heavy-duty stopping while towing
- Coated rotors
- Direct fit
- Calipers are left out of the kit
- Brake lines are left out as well
Front axle towing wear
The front brakes on a heavy-duty pickup carry a large share of the stopping work, especially when the truck is loaded or hauling a trailer. Front pads often wear faster than rear pads in these conditions, so inspection at regular intervals is useful.
When front rotors and pads are replaced, the bearings, tie rod ends and hub surfaces should also be checked for wear. A rotor that wobbles can cause pulsation under braking, which is usually a sign that the hub face needs cleaning or the rotor needs replacing. Keep the caliper slide pins moving freely so the pads release evenly.
- Check wheel bearings and tie rod ends
- Clean the hub face before mounting rotors
- Lubricate caliper slide pins during service
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K5559-36 |
| UPC | 700007155371 |
| Brake position | Front |
| Rotor type | Slotted and cross-drilled |
| Brake pads | Z36 Truck and Tow high-friction metallic |
| Rotor coating | Coated |
| Calipers | Not included |
| Brake lines | Not included |
| Fit type | Direct fit |
Vehicle fitment
The kit fits the 2011 Chevrolet Silverado 2500 HD and 3500 HD and the 2011 GMC Sierra 2500 HD and 3500 HD.
Only the 2011 model year is listed; 2010 and 2012 trucks are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors and pads from this kit go on in place of the factory parts, and the existing calipers are kept. No brake lines are supplied. Service both wheels of the axle in one visit so the left and right brakes wear alike.
What’s included
Z36 metallic pads plus slotted, cross-drilled rotors.
Not included: calipers and brake lines.








