Overview
The Power Stop K449 is a rear performance brake upgrade kit with silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads. The rear rotors and pads are paired by Power Stop for the braking application and sold together as a set.
The Z16 pads are designed for strong bite with low noise and dust compared with many other brands. No vehicle, year or chassis code is tied to this part number, so match the application to your vehicle before choosing it.
Key features
- Rear-axle position
- Cross-drilled and slotted rotors
- Silver zinc plated rotor coating
- Z16 ceramic scorched brake pads
- Rotor and pad set paired by Power Stop
- Brake lines not included
Rear brake service checklist
Rear brakes do less of the work than the fronts, but they still matter for stability under hard stops. When rear rotors are replaced, check whether the parking brake mechanism shares the hub or caliper bracket, since it may need adjustment after the job. Clean the hub face and remove any rust ridge before the new rotor goes on, because a poor seat can cause runout and pulsing.
Ceramic pads produce less dust, which makes wheels easier to keep clean, but the pad material still needs a gradual break-in. Pair new rear pads with fresh hardware and lubricate the slide pins as a qualified technician advises. Uneven rear pad wear often traces back to a stiff slide rather than the pad itself.
- Look for uneven rear pad wear or a warm wheel after driving
- Replace the caliper slide pins if they feel stiff
- Torque lug nuts evenly after the first few drives
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K449 |
| UPC | 792088530523 |
| Position | Rear |
| Rotor type | Slotted and cross-drilled |
| Rotor coating | Silver zinc plated |
| Pad type | Z16 ceramic scorched |
| Brake lines | Not included |
Vehicle fitment
Fitment is not established for this part number. Check the year, make, model and trim of your vehicle against this kit before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake lines are not part of this kit, so check the existing rear lines before fitting new rotors and pads. Bed in ceramic pads gradually before heavy braking.
What’s included
Silver zinc plated cross-drilled and slotted rear rotors and Z16 ceramic scorched brake pads.
Not included: Brake lines.








