Overview
The Power Stop K1782 is a front and rear performance brake upgrade kit with silver zinc plated cross drilled and slotted rotors and Z16 ceramic scorched brake pads. Confirm fit for your vehicle’s year, model and trim before ordering.
The kit brings a complete rotor and pad set together for both axles. It uses coated rotors, and brake lines are not included. A cross drilled rotor has holes through its friction face, while a slotted rotor has grooves cut across it; the K1782 uses both. The number with a -36 suffix, the K1782-36, is a different kit built around Z36 truck pads, so compare the suffix carefully before choosing between them.
Key features
- Both axles are covered in a single kit.
- Rotors are silver zinc plated, cross drilled and slotted.
- Z16 ceramic scorched pads come in the box.
- Direct fit is the fitment type given by Power Stop.
- Brake lines are excluded.
Front and rear kit basics
A front and rear kit replaces the friction parts at both axles at once, so the braking balance between the wheels changes together. Pads and rotors from the same kit are designed to work as a pair, which helps the new set bed in evenly. Keep the pad compound suited to how the vehicle is driven, since a firmer pad can heat up faster on steep grades.
Brake lines are not included, so inspect the existing hoses and steel lines for cracks, bulges, leaks and corrosion before the job. Old fluid that has absorbed moisture can also affect braking, so check its condition during service.
Drilled and slotted rotors run hotter in hard use and can show more pad material transfer, so they are best bedded in gradually after installation. Finish with a few moderate stops in a safe area before normal driving.
- Inspect brake hoses for cracks and leaks
- Check fluid condition during service
- Bed in pads and rotors with gradual stops
- Replace both sides of an axle together
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1782 |
| UPC | 792088530363 |
| Product type | Performance brake upgrade kit |
| Brake position | Front and rear |
| Rotor type | Slotted and cross drilled, silver zinc plated, coated |
| Brake pads | Z16 ceramic scorched brake pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
The K1782 is a direct fit kit. Match the kit to your vehicle’s year, model and trim before buying.
No vehicles are listed, so no model or year can be ruled in or out. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A front and rear kit such as the K1782 means rotors and pads for each wheel position, so plan for work on both axles. Brake lines are not supplied; the existing lines stay.
What’s included
The K1782 contains silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads for the front and rear axles.
Not included: Brake lines.









