Overview
The Power Stop K2121 is a front and rear brake kit with drilled and slotted rotors and ceramic brake pads for the driver and passenger sides of both axles. It fits vehicles built from VIN#358322 onward.
The rotors use G3000 grade castings with 210 Brinell hardness and 250 MPa tensile strength. Carbon content is 3% higher than competing brands. The rotors conform to OE dimensions and are guaranteed not to crack for 3 years when used with Power Stop pads.
Key features
- Rotors and pads for the driver and passenger sides, front and rear
- Drilled and slotted rotors with G3000 grade castings
- Rotors machined to prevent stress risers, to OE dimensions
- Zinc-dichromate plating to resist rust behind alloy wheels
- Posi-mold ceramic pads, hot pressed at over 6,000 psi and asbestos free
- Pads rated by Power Stop to hold a high friction coefficient above 1000 degrees
Matching axles and VIN
A four-corner kit makes sense when all wheels show wear at the same time, because mixed rotor ages can cause uneven braking. Before buying, check your VIN against the build point and confirm that your vehicle uses the same brake layout on each axle. Plan to replace both sides of each axle together so pull and pedal feel stay even.
Ceramic pads are quieter and produce less dust than metallic compounds, and they tolerate high heat well. Zinc-dichromate plating helps slow surface rust, though rotors still need regular inspection for scoring and cracking. Keep brake lines and calipers in good condition, since those parts are not included and affect how the kit performs.
- Look up your VIN before ordering
- Replace both sides of an axle together
- Inspect rear caliper slide pins
- Check brake fluid before a long drive
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K2121 |
| UPC | 792088530936 |
| Product type | Brake kit (drilled and slotted rotors with ceramic pads) |
| Rotor type | Slotted and cross drilled |
| Rotor casting | G3000 grade, 210 Brinell hardness, 250 MPa tensile strength |
| Rotor plating | Zinc-dichromate |
| Brake pads | Ceramic, posi-mold |
| VIN note | From VIN#358322 |
| Brake position | Front and rear |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Vehicle fit is set by VIN: this kit applies to vehicles built from VIN#358322 onward. Look up your VIN and confirm fit for your vehicle’s year, model and trim before ordering.
Without a stated vehicle, it is not possible to say which models this kit does not cover. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is direct fit and does not include brake lines. The pads are posi-molded and asbestos free, and the rotors are plated to resist rust.
What’s included
The kit contains drilled and slotted rotors and ceramic brake pads for the driver and passenger sides, front and rear.
Not included: Brake lines, calipers, and any other parts your vehicle needs.









