Overview
The Power Stop K5573-36 is a front-and-rear Extreme Truck and Tow brake kit for the 2010 Ford F-350 Super Duty.
One kit covers both axles with slotted, cross-drilled rotors and Z36 Truck and Tow pads. It is built as a matched set, so the rotors and pads are designed to work together. The kit is intended for wet, hot and hilly roads and for towing at maximum weight.
Key features
- Slotted and cross-drilled rotors for use under load
- Z36 Truck and Tow high-friction metallic brake pads
- Intended for wet, hot and hilly roads and for towing at maximum weight
- Direct-fit design matched to the listed vehicles
- Kit is supplied without calipers
- Brake lines are not part of the kit
Towing and wet-weather care
Heavy-duty trucks spend much of their working life under load, so rotor and pad condition matters more than on a light vehicle. High-friction metallic pads help braking under heavy loads and in wet or hot conditions, but they usually produce more dust and noise than a standard organic pad.
Since the kit covers both axles, service the front and rear at the same time so braking stays even. Inspect the existing calipers for seized slide pins and leaks before reassembly, and check the brake lines for cracks because they are not included. Bed in the new pads with moderate stops before towing at maximum weight.
- Replace both axles together
- Inspect calipers for leaks and seized pins
- Check brake lines for cracks and chafing
- Bed in pads before loaded driving
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K5573-36 |
| UPC | 700006898991 |
| Brake position | Front and rear |
| Rotor type | Slotted and cross-drilled |
| Brake pads | Z36 Truck and Tow high-friction metallic |
| Rotor coating | Coated |
| Calipers | Not included |
| Brake lines | Not included |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2010 Ford F-350 Super Duty only.
The F-250 Super Duty and other F-350 years are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a direct-fit pad and rotor kit, so it replaces the factory rotors and pads without modification. It contains no calipers, and the existing calipers stay on the vehicle. Change the rotors and pads on both wheels of an axle together so braking stays even side to side.
What’s included
Slotted and cross-drilled rotors and Z36 Truck and Tow metallic brake pads.
Not included: calipers and brake lines.









