Overview
The Power Stop K3166 is a front and rear performance brake upgrade kit with cross-drilled and slotted silver zinc plated rotors and Z16 ceramic scorched brake pads for both axles. It covers the front and rear positions under one part number.
Z16 ceramic scorched pads are made for firm stopping with minimal noise and dust, and the rotor and pad pairings were built together for the braking application. Fit should be confirmed for each vehicle before choosing a front and rear set.
Key features
- Front and rear coverage
- Cross-drilled and slotted rotors
- Silver zinc plated rotor coating
- Z16 ceramic scorched brake pads
- Matched rotor and pad pairings
- Direct fit for the front and rear positions.
Both axles at once
A front and rear kit lets both axles be upgraded with one part number, which keeps the rotor and pad pairings consistent across the vehicle. Because the two ends often wear at different rates, inspect each axle separately after fitting and note the mileage at which each set was changed.
Cross-drilled and slotted rotors on both axles release heat and residue during repeated stops. Z16 ceramic scorched pads are made for firm stopping with less noise and dust, though rear pads may see lighter loads than front pads in ordinary driving.
Check the caliper slide pins, hoses and hub faces on both axles before installation. Confirm that the brake lines on the vehicle are in good condition, since brake lines are not included with the kit and must be reused or replaced separately.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K3166 |
| UPC | 792088916785 |
| Position | Front and rear |
| Rotor type | Slotted and cross-drilled |
| Rotor coating | Silver zinc plated |
| Pad type | Z16 ceramic scorched |
| Brake lines | Not included |
Vehicle fitment
Check your year, make, model and trim against the front and rear kit before ordering. Confirm the front and rear brake layout on your vehicle matches the parts.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake lines are not included, so inspect the existing lines on both axles before fitting. Bed in the new ceramic pads gradually at both ends of the vehicle.
What’s included
Cross-drilled and slotted silver zinc plated rotors and Z16 ceramic scorched brake pads for the front and rear.
Not included: Brake lines.









