Overview
The Power Stop K1799-36 is a rear Heavy Duty Truck and Tow brake kit for the 2005–2007 Ford F-250 Super Duty and F-350 Super Duty. The rotors are slotted and cross drilled, the pads are Z36 high-friction metallic pads, and no calipers are included.
Power Stop built this kit for heavy-duty braking in wet, hot and hilly conditions, and for towing at maximum weight. Brake lines are not included, the rotors are coated, and the kit is direct fit. Cross-drilled rotors have holes through their friction face and slotted rotors have grooves cut across it, and the K1799-36 combines both. Several rear Z36 kits exist for Super Duty trucks, so the model years are the key point for matching this part. The Z36 pads are designed for towing and heavy loads.
Key features
- Rear position, covering the rear axle only.
- Slotted and cross-drilled coated rotors.
- High-friction metallic Z36 pads.
- It is for the 2005–2007 F-250 and F-350 Super Duty.
- Calipers and brake lines are not in the kit.
Model year and rear kit choice
Heavy-duty rear kits can look alike, so the model year is the fastest way to confirm a match. Look at the year, model and trim before buying, and compare the rear position on the box. A rear set changes only the rear axle, leaving the front brakes as they are, which keeps the job smaller but still requires care.
Z36 pads are chosen for towing, hauling and wet or hot roads, where stopping power matters most. They can be noisier and dustier than everyday pads, so expect a short adjustment period. Coated slotted and cross-drilled rotors need clean hub faces and tight fasteners to run true, so inspect them after the first trips.
- Compare model year, model and trim
- Confirm the rear position before ordering
- Keep existing calipers and brake lines
- Bed in Z36 pads before heavy towing
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1799-36 |
| UPC | 792088564665 |
| Product type | Heavy duty truck and tow brake kit without calipers |
| Brake position | Rear |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Z36 high-friction metallic pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2007 Ford F-250 Super Duty and F-350 Super Duty, with the trims shown below.
- 2005–2007 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
- 2005–2007 Ford F-350 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
Model years before 2005 or after 2007 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fitting the K1799-36 touches the rear axle only. Plan to exchange rotors and pads together, keeping the calipers and brake lines that are already on the truck.
What’s included
The K1799-36 contains slotted and cross-drilled rotors and Z36 high-friction metallic pads for the rear axle.
Not included: Calipers and brake lines.









