Overview
The Power Stop K2119 is a front brake kit with drilled and slotted rotors and ceramic disc brake pads for the driver and passenger side front. The 3.5 inch tall composite rotors are coated. Brake lines are not included with this kit.
The rotors are made from G3000 grade castings with a higher carbon content, 3% above competing brands, and reach 210 Brinell hardness and 250 MPa tensile strength. They are machined to prevent stress risers and carry a 3-year guarantee against cracking when used with Power Stop pads.
Key features
- Front brake kit for the driver and passenger side
- Drilled and slotted rotors, 3.5 inch tall composite design
- Ceramic disc brake pads
- Rotors coated, with zinc-dichromate plating that Power Stop says resists rust
- G3000 grade castings with higher carbon content
- Rotors guaranteed not to crack for 3 years when used with Power Stop pads
- Posi-mold pads, hot pressed at over 6,000 psi, asbestos free
- Does not include brake lines
Ceramic pads and rotor care
Ceramic disc pads produce less dust than many metallic pads and tend to run quieter during daily driving. They work best with rotors that are cleaned and free of rust before installation. Wipe the hub and rotor contact surface, check the wheel studs, and make sure the new rotors sit flat before torquing the wheel nuts.
Composite rotors are designed to balance heat handling and weight, but they still need regular inspection. Look for deep scoring, heat cracks and a rough or pulsing feel under braking. Front brakes do most of the work in a stop, so inspect them every time the wheels come off for tire rotation or other service. Keep brake fluid fresh to help the system respond consistently.
- Clean the hub and rotor contact surface before fitting
- Check wheel nut torque after the first drive
- Look for scoring and heat cracks at each service
- Replace pads before the wear indicator reaches the rotor
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K2119 |
| UPC | 792088528278 |
| Product type | Front disc brake pad and rotor kit |
| Brake position | Front, driver and passenger side |
| Rotor type | Slotted and cross drilled |
| Rotor height | 3.5 inch, composite rotors |
| Rotors coated | Yes |
| Pads | Ceramic disc brake pads |
| Rotor castings | G3000 grade |
| Brinell hardness (per Power Stop) | 210 |
| Tensile strength (per Power Stop) | 250 MPa |
| Brake lines | Not included |
| Fit type | Direct fit |
Vehicle fitment
This kit is direct fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Brake kits are specific to the vehicle and brake size. Compare the rotor and pad sizes with your current brakes, and confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Brakes are a safety system, so professional installation is the safer choice. Replace brake parts as complete axle sets, clean and inspect the related hardware, and tighten fasteners to the torque values in your service manual.
Bed in new pads and rotors the way the manufacturer directs, avoid hard stops during the break-in period, and re-check fasteners and braking performance after the first miles of driving. Inspect brake lines, calipers and brake fluid at the same time.
What’s included
- Front drilled and slotted rotors
- Ceramic disc brake pads
Not included: brake lines.









