Overview
The Power Stop Performance Brake Upgrade Kit K1233 (part number PSTK1233) is a front brake kit with silver zinc plated cross-drilled and slotted rotors and Z16 ceramic brake pads. Power Stop describes its kits as a complete set of cross-drilled and slotted rotors with high-performance Evolution ceramic pads, intended for a stronger brake feel.
The K1233 is a front brake kit with silver zinc plated, coated, cross-drilled and slotted rotors paired with Z16 ceramic pads. It is designed for a firmer brake feel than a standard set. Brake lines are not part of the package. No vehicle fit is confirmed for this kit, so use it to identify its contents and brake position only.
Key features
- Front brake position
- Silver zinc plated cross-drilled and slotted rotors
- Z16 ceramic brake pads
- Rotors are coated
- Brake lines are not included
Matching a kit to your brakes
Without a confirmed vehicle fit, the first job is comparing the kit with the brakes already on the truck. Rotor diameter, hub bolt pattern, center bore and rotor thickness all need to match. Caliper type and size matter as well, because a rotor that fits the hub may still clear the caliper poorly. Measure the existing rotor and check the minimum thickness stamped on it before deciding the new set is suitable.
Pads should be chosen with the same care. Ceramic compounds usually give quiet, low-dust stops on street vehicles, while heavier loads call for a different friction level. Check the hub and wheel bearings for play before fitting, and clean the mounting surface thoroughly. After installation, bed the pads in gradually so the friction material transfers evenly to the new rotor surface.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1233 |
| UPC | 792088525574 |
| Product type | Disc brake pad and rotor kit |
| Brake position | Front |
| Rotor type | Slotted and cross drilled |
| Rotor coating | Coated, silver zinc plated |
| Brake pads | Z16 ceramic |
| Brake lines | Not included |
| Fit type | Direct fit |
Vehicle fitment
Check that the axle and brake size match your vehicle before buying.
No vehicle fitment is stated. Confirm your vehicle’s year, model, trim and brake setup before ordering.
Installation notes
Brake work is safety-critical, so professional installation is a sensible choice. Support the vehicle on jack stands on level ground, keep friction surfaces free of oil and grease, and tighten every fastener to the torque value in the vehicle’s service manual. Check the brake fluid level, bed in the pads at low speed and test the brakes before normal driving. Re-check wheel fasteners after the first few miles.
What’s included
Cross-drilled and slotted rotors and ceramic brake pads. Check the package contents against your installation before starting.
Not included: Brake lines and brake fluid.









