Overview
The Power Stop K6268 is a front and rear 1-Click drilled and slotted brake kit with silver zinc plated rotors and Z16 ceramic brake pads. Confirm fit for your vehicle’s year, model and trim before ordering.
Power Stop says its brake kits include a complete set of cross-drilled and slotted rotors and Evolution ceramic pads, and that matching the pads and rotors gives a big-brake feel. Because the K6268 covers both axles, one kit holds the parts for every wheel position. Brake lines are not included. In practical terms, a front and rear kit like the K6268 suits someone who wants every wheel position refreshed in one go, rather than matching two separate axle kits. A cross-drilled rotor has holes through its friction face and a slotted rotor has grooves cut across it. The K6268 combines both patterns on rotors that carry a silver zinc plated coating.
Key features
- One kit covers both the front and the rear brakes.
- The rotors are silver zinc plated, cross drilled and slotted.
- The pads are Z16 ceramic scorched brake pads.
- Direct-fit kit with coated rotors.
- Brake lines are not part of the K6268.
Planning a front and rear refresh
Replacing rotors and pads on both axles at the same time keeps braking balanced from one end of the vehicle to the other. Front brakes usually do more of the work, while rear rotors and pads often wear more slowly. When both positions are in one kit, you can still inspect each axle first and decide whether all four corners need new parts.
Pads that do not match the rotor surface can glaze, squeal or pull, so new rotors and pads are best fitted together. Before installation, check the caliper slide pins, dust boots and hardware clips, since a sticking caliper will wear new pads unevenly. Brake lines stay on the vehicle, so inspect them for cracks, chafing and seepage during the same job.
- Clean the hub face before mounting each rotor
- Re-torque lug nuts after the first few drives
- Bed in pads with gentle stops before normal use
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K6268 |
| UPC | 700006899551 |
| Product type | 1-Click drilled and slotted brake kit |
| Brake position | Front and rear |
| Rotor type | Slotted and cross drilled, silver zinc plated, coated |
| Brake pads | Z16 ceramic scorched brake pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Check fit against your vehicle’s year, model and trim before ordering. Because the kit covers both axles, confirm that the front and rear brake positions match your vehicle.
Because no vehicles are listed, no other models or years can be ruled in or out. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replace the rotors and pads of each axle together when fitting the K6268, and plan for both axles because this is a front and rear kit. The existing brake lines stay in place, since none are supplied.
What’s included
The K6268 contains silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads for the front and rear axles.
Not included: Brake lines.









