Overview
The Borgeson power steering conversion box, part number 800125, is a front steer power assist gearbox for the 1966 to 1977 Ford Bronco. It replaces the original steering gear with an integral power steering unit. The box has a 14:1 steering ratio and a cast iron body with a painted black finish.
The box uses an integral power steering gearbox design with modern power steering feel and feedback and a quicker 14:1 ratio. It bolts to the factory mounting location and fits the stock pitman arm. It is built with CNC equipment and sturdy materials.
Key features
- Integral power assist gearbox with modern power steering feel and feedback
- 14:1 steering ratio for quicker steering
- Front steer design
- Bolts directly to the factory mounting location
- Fits the stock pitman arm, so the factory arm stays in use
- Cast iron body with a painted black finish
- Built with CNC equipment
Steering safety after conversion
Replacing a steering gear changes how the front end responds, so the whole steering system should be checked after installation. A quicker ratio makes the wheel more responsive, which means small steering errors show up sooner at speed. Check the column, the universal joint and the hose connections before the vehicle is driven on the road.
Power steering conversions also depend on the pump, the fluid and the hose routing. Bleed the system fully, then check for leaks at every fitting. Look at the pitman arm, drag link and tie rod ends as well, since they carry the same loads as the new box and are often worn on older Broncos.
- Bleed the power steering system fully before driving
- Check every hose fitting for leaks
- Inspect the drag link and tie rod ends for play
Specifications
| Brand | Borgeson Steering |
|---|---|
| Part number | 800125 |
| UPC | 843975016719 |
| Product type | Steering gear box |
| Steering box style | Front steer |
| Steering box type | Power assist |
| Steering ratio | 14:1 |
| Material | Cast iron |
| Finish | Painted black |
| Mounting bracket included | No |
| Pitman arm included | No |
Vehicle fitment
It is a direct fit for the 1966 to 1977 Ford Bronco in Base, Custom, Northland, Ranger, Roadster and Wagon trims, and for the 1975 to 1977 Ford Bronco Sport.
Model years after 1977 are not on the list, so later Bronco generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The box bolts to the factory mounting location and fits the stock pitman arm. A new universal joint is required to connect the box to the stock steering column, and a new hose kit is required to connect it to the power steering pump. The hose kit connects to the pump of your choice, so the installer selects the pump.
Steering is safety-critical, so confirm the column and hose connections and check steering action before the vehicle is driven.
What’s included
The Borgeson power steering conversion box, part number 800125, with UPC 843975016719.
Not included: mounting bracket, pitman arm, universal joint for the stock steering column, and hose kit for the power steering pump.







