Overview
The Borgeson Steering 920010 is a new manual steering box in the OEM Saginaw 525 Series, with a 3/4 in. -30 input spline and a 24:1 ratio. It is a manual steering gear box for owners working on that type of steering setup.
It is an OEM Saginaw 525 Series box, so compare the input spline and 24:1 ratio with your current box before fitting it.
Key features
- New manual steering box
- OEM Saginaw 525 Series
- 3/4 in. -30 input spline
- 24:1 steering ratio
Choosing a replacement box
A steering box determines how far the wheel turns to move the front wheels, so the ratio and the input spline must suit the rest of the steering system. A quicker ratio needs less wheel travel but can feel sharper at speed. Before choosing, measure the input spline and compare the box with the one it will replace.
Box replacement often involves a pitman arm, drag link and steering column coupler. Inspect those parts for wear while the system is open, since looseness there affects steering feel and alignment after the swap. After installation, have the steering checked for alignment and play, and recheck fluid levels if the box is hydraulic.
- Confirm input spline before ordering
- Compare ratio with the current box
- Inspect pitman arm and drag link
- Check alignment after the swap
Specifications
| Brand | Borgeson Steering |
|---|---|
| Part number | 920010 |
| UPC | 843975006611 |
| Series | OEM Saginaw 525 Series |
| Input spline | 3/4 in. -30 |
| Steering ratio | 24:1 |
| Condition | New |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the input spline and 24:1 ratio with your current box, and check your vehicle’s steering setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The input spline is a fixed size, so confirm it matches your steering shaft before fitting the box. Have the steering checked for alignment and play once the swap is complete.
What’s included
The box is a new manual steering box only.
Not included: Check the steering shaft and mounting hardware against your installation before starting.







