Overview
The PIAA 30329 is a bracket kit that mounts PIAA RF3 LED cube lights in the factory fog light location of 2010 and 2011–2016 Dodge Ram 2500 and 3500 trucks. The black powder-coated steel kit is built to replace the OEM fog lights.
The RF3 LED lights are designed for more output and lower power draw than the factory fog lights. The bracket is designed to work only with the RF3 LED lights, which are sold separately.
Key features
- Allows mounting of two pair of RF3 LED cube lights
- Designed for the OE fog light location
- Black powder-coated steel construction
- Mounting hardware included
- Designed for easy installation
Fog light swap considerations
Replacing factory fog lights with a bracket-mounted cube light changes the front of the truck’s appearance and its load on the electrical system. Cube lights often draw more current than the factory units they replace, so a relay and properly sized fuse matter. Check the battery and charging system before adding a heavy lighting load.
Steel brackets resist bending in normal use, but the finish can chip where it contacts the bumper, the lights, or the wiring. Inspect the bracket welds and fasteners after rough driving, and touch up any bare steel before it starts to rust. Wet and salted roads speed up corrosion on exposed edges.
Plan the wiring and switch layout for every light you intend to run, so a later addition does not require reworking the harness. Consider the lights’ size and beam pattern for the job before buying.
Specifications
| Brand | PIAA Lighting |
|---|---|
| Part number | 30329 |
| UPC | 722935303291 |
| Material | Steel |
| Finish | Black powder coat |
| Light capacity | Two pair of RF3 LED cube lights |
Vehicle fitment
The kit fits the 2010 Dodge Ram 2500 and 3500 and the 2011–2016 Ram 2500 and 3500, across the Laramie, SLT, ST, SXT, Power Wagon and Tradesman trims.
Ram 1500 models and model years outside 2010 through 2016 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting hardware is included with the kit. The RF3 lights need their own wiring; a fused relay circuit is the usual approach for auxiliary lights, and local road-use rules apply to driving lights.
What’s included
The kit includes the black powder-coated steel brackets and the mounting hardware.
Not included: RF3 LED cube lights, which are sold separately.









