Overview
The Griffin Thermal Products CU70169 is a PerformanceFit combo unit radiator for 1987 to 2006 Jeep Wrangler YJ and TJ models with automatic transmissions. The combo unit includes the shroud, fan(s), wiring, temperature sensor and radiator cap.
The aluminum radiator has a large, thick core measuring 18 X 20 X 2.68 with 2 rows of 1.25 inch tubing. The company has focused on aluminum heat exchangers since 1981 and will build a radiator to a customer’s exact requirements.
Key features
- Combo unit with shroud, fan(s), wiring, temperature sensor and radiator cap
- Large thick core, 18 X 20 X 2.68
- 2 rows of 1.25 inch tubing
- Automatic transmission application
- Trans cooler fittings: 3/8 inch
- Inlet/outlet TR/BL, sized 1.25 inch and 1.5 inch
- Aluminum/silver finish
Cooling for automatic transmissions
An automatic transmission generates heat that the engine radiator often has to help shed, especially in stop-and-go driving, on steep grades, or when pulling a trailer. A combo unit radiator that includes a trans cooler section can take some of that load, but only if the fittings and lines match the cooler setup in the vehicle. Mismatched fittings are a common reason for leaks at the connections.
Before installing, compare the existing transmission lines with the radiator inlet and outlet. Use the correct fittings, add a fresh fluid level once the system is full, and watch for seepage after the first drive. Keep the fan wiring and temperature sensor connected so the fan responds to coolant temperature as designed.
- Confirm fitting size and type before connecting lines
- Check connections for seepage after the first drive
- Keep the temperature sensor wiring intact
Specifications
| Brand | Griffin Thermal Products |
|---|---|
| Part number | CU70169 |
| UPC | 766897321160 |
| Product line | PerformanceFit |
| Product type | Combo unit radiator |
| Transmission | Automatic |
| Finish | Aluminum/Silver |
| Core size | 18 X 20 X 2.68 |
| Tubing | 2 rows of 1.25 inch |
| Trans cooler | TOC |
| Trans cooler fittings | 3/8 inch |
| Inlet/outlet | TR/BL |
| Inlet/outlet size | 1.25 inch / 1.5 inch |
Vehicle fitment
It fits 1987 to 2006 Jeep Wrangler YJ and TJ models.
Other Wrangler generations are not covered, and trims are not identified. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The unit includes wiring and a temperature sensor, so the fan wiring is part of the kit. The transmission cooler fittings are 3/8 inch, which matters if an automatic transmission cooler is plumbed to this radiator. Disconnect the battery before working on the fan wiring.
What’s included
The combo unit includes the shroud, fan(s), wiring, temperature sensor and radiator cap.







