Overview
The Crown Automotive spark plug wire set, part number 68017712AB, is a 7.00 mm diameter ignition wire set for the 3.8L engine. It fits 2007–2009 Jeep Wrangler (JK) models in Rubicon, Sahara, Unlimited Rubicon, Unlimited Sahara, Unlimited X and X trims.
It is built for 2 and 4-door models and is a direct fit. It is not RFI suppression wire.
Key features
- Wire set diameter listed at 7.00 mm
- Built for the 3.8L engine in 2 and 4-door models
- It is not RFI suppression wire.
- It is a direct fit for the Wrangler JK trims covered above.
Spark plug wire care
Spark plug wires carry high voltage from the coil to each plug on the 3.8L engine, and their condition affects how cleanly the engine fires. Wires that are not RFI suppression type carry a plain conductor, so they are not used where radio interference control is needed. Keep the wires routed away from hot exhaust parts and sharp edges.
Replace the wires as a complete set, and make sure each one seats firmly on its plug and at the coil. Check boots for cracks and corrosion on the terminals, and clean terminals before reconnecting. Route the wires with their boots fully seated, since loose boots can allow arcing that causes misfires. Inspect the set whenever the plugs are replaced.
- Cracked or hard boots
- Corroded terminals
- Wires touching the exhaust manifold
- Misfire or rough idle after a change
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 68017712AB |
| UPC | 848399048148 |
| Engine | 3.8L |
| Body style | 2 and 4-door models |
| Diameter | 7.00 mm |
| RFI suppression | Not RFI suppression |
| Fitment type | Direct fit |
Vehicle fitment
Manufacturer fitment list: 2007–2009 Jeep Wrangler (JK) in Rubicon, Sahara, Unlimited Rubicon, Unlimited Sahara, Unlimited X and X trims.
The list does not include the base, Sport or Sport S trims, and it does not cover other years of the Wrangler JK. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The set is the wire set only. Confirm the wire set matches your installation before starting.








