Overview
The MSD Custom Spark Plug Wire Set, part number MSD32189, is a set of 8.50 mm spark plug wires that MSD says transfers ignition coil power to the plug with minimum voltage loss. Thick silicone jacketing is meant to limit voltage loss and damage from exhaust heat.
It carries Universal Fit and names no vehicles, model years or engines. Confirm fit for your engine before choosing this set.
Key features
- Thick silicone jacketing
- Minimum voltage loss from coil to plug.
- RFI suppression included
- 8.50 mm wire diameter
- Direct Fit type
Routing and heat exposure
Spark plug wires carry high voltage from the coil to each plug while sitting close to exhaust heat, moving parts and constant vibration. Routing matters as much as the wire itself. Keep each wire clear of headers, exhaust manifolds and belts, and secure it with clips or loom so it cannot rub or sag onto hot surfaces.
Worn wires often appear as misfires under load, hard starts in damp weather, or cracking and brittle jacketing near the boots. Inspect the jacket and boots during routine service. When the plugs are changed, clean the boots and coil towers, then reseat each boot firmly so the connection does not arc.
- Check each wire for cracks, soft spots or burn marks
- Confirm the firing order before removing the old set
- Replace plugs and wires together when the set is worn
Specifications
| Brand | MSD |
|---|---|
| Part number | MSD32189 |
| Type | Direct Fit |
| Wire diameter | 8.50 mm |
| RFI suppression | Included |
| Jacket material | Silicone |
| Fitment attribute | Universal Fit |
Vehicle fitment
No vehicle is named for this set, and Universal Fit is the only fitment attribute. Measure your plug locations and routing against the wires before you decide.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The set is supplied as wires. Check the wire count, boot style and any included hardware against your installation before starting.









