Overview
The Omix-Ada 4WD-6020 is a throttle cable bracket for the clip-in problem on fiberglass bodies. Fiberglass bodies have a thicker firewall than the original steel bodies, which makes the throttle cable hard to clip, and this bracket gives the cable a secure mount to clip into.
Omix-Ada labels the bracket universal fit but names no vehicle, make, model or year, so check it against your body type before installing.
Key features
- Clips the throttle cable into a secure mount
- Designed for the thicker firewall of fiberglass bodies
- Addresses a cable clipping problem on fiberglass bodies
- Labeled universal fit
Fiberglass body throttle linkage
On fiberglass bodies the firewall is thicker than on steel bodies, so a standard clip can be hard to seat around the throttle cable. A mounting bracket gives the cable a fixed point to clip into, which keeps the throttle linkage in line and reduces slack. Check that the bracket sits square to the firewall and that the cable moves freely from idle to full travel before you drive the vehicle.
Throttle cables wear over time, so inspect the sheath, the inner cable and the end fittings when you install a new bracket. Look for kinks, fraying or stiff motion at the pedal. Lubricating the cable ends where they pivot can help, and a bracket paired with a fresh cable often gives the cleanest result.
- Check firewall thickness before mounting
- Inspect the cable sheath for kinks
- Confirm smooth pedal return
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 4WD-6020 (also OAI4WD-6020) |
| UPC | 70000434137 |
| Fit label | Universal fit |
| Body type | Fiberglass bodies, with a thicker firewall than steel bodies |
Vehicle fitment
The bracket is labeled universal fit, but it is written for fiberglass bodies, and no vehicle years, makes or models are given.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Compare the bracket with your existing cable setup before starting.









