Overview
The Omix-Ada 17215.02 is an in-dash electric tachometer for 4, 6 or 8 cylinder engines. It fits the 1976–1983 Jeep CJ5, the 1976–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler.
The gauge has a black face, standard units and an O.E. replacement mounting size.
Key features
- Works with 4, 6 or 8 cylinder engines
- In-dash mount
- Electric operation
- Black face
- Standard units
Reading engine speed
A tachometer shows engine speed in revolutions per minute, which helps you judge gear choice, idle and when the engine is working hard on a climb. Electric tachometers take a signal from the ignition system, so the gauge reads correctly only when the wiring and ground are sound. Electrical noise from aftermarket accessories can make the needle jump, so route the tachometer wire away from high-current leads.
Choosing the right setting matters for the rest of the install. Confirm the cylinder count before wiring, since a mismatch produces readings that look plausible but are wrong. Keep the gauge face clear of glare by mounting it at a comfortable viewing angle, and check that the bezel seats evenly so the housing stays dry.
Over time, look for a needle that sticks, flickers or drops to zero at idle. Those symptoms usually point to a connection or ground problem, which is cheaper to fix than the gauge itself.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17215.02 |
| UPC | 804314037321 |
| Electric or mechanical | Electric |
| Gauge type | Tachometer |
| Gauge series | Factory Match Jeep |
| Cylinder compatibility | 4, 6 or 8 cylinder engines |
| Units | Standard |
| Face color | Black |
| Mounting size | O.E. Replacement |
| Fitment | Direct Fit |
Vehicle fitment
The manufacturer list covers the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade) and the 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR).
Wrangler and later models are not on this list, and CJ years outside those ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Select the cylinder setting and review the wiring before connecting the tachometer. Disconnect the battery before wiring the electric gauge.
What’s included
Gather any mounting hardware or wiring your install needs before you begin.


















