Overview
The Omix-ADA 17234.11 is a switch nut, the threaded nut used to hold a heater control switch in place. Omix-ADA identifies it as part number 17234.11, and its UPC is 804314028657.
Key features
- Switch nut replacement from Omix-ADA
- It has a direct fit design.
What a switch nut holds
A switch nut threads onto the switch body or its mounting stud to clamp the switch against the dash or panel. Its job is to hold the switch steady so the contacts stay aligned with the control knob. A loose nut can let the switch rotate, which may cause intermittent speed changes or a switch that feels loose.
When replacing a nut, check the threads on the switch and the stud for cracks or stripped areas. Snug the nut by hand before tightening so the threads do not cross. Clean the mounting surface of dust and debris, since grit can keep the switch from seating correctly against the panel.
- Check threads for stripping
- Start threads by hand
- Tighten snugly without overtightening plastic
- Recheck the switch after the first few uses
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17234.11 |
| UPC | 804314028657 |
| Component | Switch nut |
| Fitment type | Direct fit |
Vehicle fitment
Verify the year, model and trim before ordering. Check the switch the nut attaches to, since the nut must match its thread and mounting.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents when it arrives to confirm the quantity and any other included parts before installing.












