Overview
The Omix-ADA 18020.01 is a steering column to firewall seal made of foam. It has a hole for the steering column to pass through and four pre-punched holes for the firewall fasteners. Omix-ADA’s product information names no vehicle years, models or trims.
The seal sits where the steering column passes through the firewall.
Key features
- Foam construction
- Central hole for the steering column
- Four pre-punched holes for firewall fasteners
- Omix-ADA part number 18020.01 with UPC 804314024154
Sealing the firewall
A firewall seal blocks water, road dust and exhaust odor from entering the cabin where the steering column passes through the sheet metal. Foam seals compress over time and can tear or harden, especially where heat and sun reach the engine bay. Look at the seal each time the column or dash is worked on.
Before fitting a new seal, clean the firewall around the opening so the seal sits flat and no old debris is trapped underneath. Keep the column hole centered and check that the fastener holes line up before tightening. After the first rain, check the floor for water near the column to confirm the seal is working.
- Check foam for tears, hardening or gaps
- Clean the firewall surface before fitting
- Inspect for water on the floor after rain
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18020.01 |
| UPC | 804314024154 |
| Material | Foam |
| Column hole | Yes |
| Pre-punched firewall holes | 4 |
| Fasteners | Not included |
Vehicle fitment
Fit depends on your firewall and steering column, so confirm your vehicle’s year, model and trim before ordering. Check the seal against your firewall and column before fitting it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The four firewall fasteners are not included, so you will need to source them separately before fitting the seal.
What’s included
This item is the foam seal only, with four pre-punched holes for the firewall fasteners.
Not included: firewall fasteners.












