Overview
The Omix-Ada 12008.05 is a steel replacement rear floor panel for the 1976–1983 Jeep CJ5. It is positioned at the rear of the floor and includes a rear under floor support rib.
It is a direct fit for the CJ5 models in the trims shown under Vehicle fitment.
Key features
- Steel construction
- Rear under floor support rib included
- Rear floor position
- Direct fit per the manufacturer fitment list
Rear floor support rib role
A rear under floor support rib adds stiffness to the floor where the rear seat and the body frame connect. It helps keep the floor from flexing under passenger weight and when the vehicle goes over rough terrain. When a rib is damaged or rusted, the panel above it can sag, so inspect the rib before deciding how much floor to cut.
Confirm the rib sits against the new panel once the floor is fitted, and check that the holes or seams line up with the body structure. Weld the rib and panel in short sections, then coat the seams. Many CJ5 floor repairs involve the seat mounts and body crossmembers, so plan the teardown and support early.
- Inspect the rib from underneath
- Check that the panel sits flat before welding
- Coat hidden seams after assembly
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 12008.05 |
| UPC | 804314047092 |
| Position | Rear |
| Material | Steel |
| Included | Rear under floor support rib |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 1976–1983 Jeep CJ5 in the Base, Golden Eagle, Laredo, Limited and Renegade trims. The CJ7 and Wrangler are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan for interior teardown first, since the seats and trim must come out before the rear section is cut and welded. Wear eye protection while cutting and welding.
What’s included
The rear under floor support rib is included. Verify the package contents against your repair plan first.









