Overview
The Omix-Ada 12007.06 is a steel replacement front floor panel for the 1976–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler. It is positioned at the front of the floor and comes with a support brace, for owners replacing a worn or rusted front floor section.
The product photo shows a rear floor panel for illustration only, so rely on the part number and fitment details rather than the image.
Key features
- Steel construction
- Front floor position
- Includes support brace
- Direct fit for the CJ7 and Scrambler in the trims shown under Vehicle fitment
Floor panel install planning
A front floor panel sits under the driver and passenger feet, so it sees mud, water and road grit from above and below. Before cutting, expose the full area and probe the sills, the transmission tunnel edges and the floor corners for thin metal. A patch that looks solid on the surface can hide rust in the seams.
Plan the order of work. Clean and fit the panel dry, then tack it at the corners before finishing the seams. Work in short welds and let each section cool. Seam sealer on the underside and a coat of primer on the bare steel help the repair last through wet seasons.
- Remove seats and interior trim first
- Check the brace fits before final welds
- Mark wiring and brake lines before cutting
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 12007.06 |
| UPC | 804314038014 |
| Position | Front |
| Material | Steel |
| Included | Support brace |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 1976–1986 Jeep CJ7 in the Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and the 1981–1985 Jeep Scrambler in the Base, Laredo, Renegade, SL and SR trims. The list does not include the CJ5 or the Wrangler.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Floor panel replacement usually means removing the seats and interior trim first, then cutting out the old panel and welding in the new one.
What’s included
The support brace is included. Check for any other hardware you need before starting.









