Overview
The Key Parts Factory Style Rocker Panel, part number 0484-102R, is a passenger side steel rocker panel for the 1999 to 2004 Jeep Grand Cherokee (WJ). Key Parts says its panels are designed to replicate exact OEM fitment and to offer increased coverage areas compared with competing panels.
A rocker panel is the body panel running along the bottom of the cabin between the wheels, and replacement panels are used for rust or collision repair. This panel is made from high gauge steel with an OEM style electro-deposit primer finish.
Rocker panel replacement is usually needed after rust or collision damage along the lower body. This passenger side panel has an OEM style electro-deposit primer finish and can be painted after installation. Check the fit against the old panel before cutting any metal, and confirm the panel matches the vehicle at the sill, door and floor seams.
Key features
- Passenger side rocker panel
- High gauge steel construction
- OEM electro-deposit primer (EDP) finish
- Designed to replicate exact OEM fitment.
- Direct Fit style
- Part of Key Parts’ range of rust and collision panels
Preparing for panel replacement
A rocker panel sits under the doors and is often hidden rust’s first target, because it traps road salt and moisture. Before fitting a new panel, remove the old one carefully and check the floor pan, the jack points and the inner sill for thinning metal. Rust that reaches past the panel usually needs repair before the new piece goes on.
Good prep makes the paint and seam work last. Clean the mating surfaces, apply seam sealer where the panel meets the body, and treat any bare metal before priming. Drain holes should be cleared so water does not sit inside the new panel once it is in place.
- Look for bubbling paint along the lower door edge
- Probe the sill from inside for soft metal
- Clear drain holes before final assembly
- Seal seams and treat bare metal before painting
Specifications
| Brand | Key Parts |
|---|---|
| Part number | 0484-102R (also KPA0484-102R) |
| UPC | 70000700335 |
| Part type | Rocker panel, factory style |
| Side | Passenger side |
| Material | High gauge steel |
| Finish | OEM Electro-Deposit primer (EDP) |
| Fit type | Direct Fit |
Vehicle fitment
The manufacturer fitment list for the Key Parts 0484-102R rocker panel is:
- 1999 to 2004 Jeep Grand Cherokee (WJ) (Laredo, Limited, Overland, Special Edition, Sport)
This panel fits the Grand Cherokee WJ only, not the earlier ZJ generation or other Jeep models. The driver side needs a separate panel. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Replacing a rocker panel involves cutting, welding and refinishing, and it affects body strength, so body shop installation is advisable. Treat bare metal against rust, and paint or seal the panel after installing.









