Overview
The Omix-ADA 16529.04 is a spindle bearing kit for Dana 30 spindles, sold for the driver or passenger side. It is a direct OE replacement built to original specifications.
The kit includes bearings, a seal and a washer. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Bearings, seal and washer included
- Driver or passenger side
- Built to original specifications as a direct OE replacement
- Carries a limited five year warranty
Bearing installation tips
Spindle bearings carry wheel load and need correct preload to run smoothly. Clean the spindle and the bearing bore thoroughly, and check for scoring or pitting that could make a new bearing wear unevenly. Pressing or tapping bearings into place should be done with a suitable tool so the races are not damaged.
A bearing kit is often replaced with the seal and washer at the same time, since they wear together. Pack bearings with the grease type the axle service calls for, and set preload as the service procedure for your axle directs. Rotating the hub by hand after assembly can reveal binding before the vehicle is driven.
- Inspect the spindle for scoring
- Replace seal and washer with the bearings
- Check for binding by hand before driving
Specifications
| Brand | Omix-ADA |
|---|---|
| UPC | 804314043490 |
| Axle | Dana 30 |
| Side | Driver or passenger |
| Included | Bearings, seal and washer |
| Warranty | Limited five year warranty |
Vehicle fitment
It is marked Direct Fit and is made for Dana 30 spindles. Verify year, model and trim against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Bearings, seal and washer.
Not included: The spindle is not part of the kit. Check the spindle type on your axle before installing the bearing kit.














