Overview
The Omix-ADA OAI16752.10 is a rear right brake shoe self adjusting screw for Jeep drum brakes, sold individually. It fits the 1982–1989 Jeep CJ5, CJ7, Scrambler, Cherokee (XJ) and Wrangler (YJ) models.
A self adjusting screw sets the clearance between the brake shoe and the drum as the linings wear. This is the rear right unit, so match the side before fitting. Omix-ADA builds it to original Jeep specifications as a direct replacement.
Key features
- Direct replacement built to original Jeep specifications
- Rear right position for the brake shoe adjuster
- Limited five year warranty from Omix-ADA
- Sold individually as one screw
Adjuster wear and brake feel
A self adjusting screw keeps the shoe close to the drum as the linings wear, so the pedal stays at a consistent height. When the adjuster stops working, the shoe sits too far from the drum, the pedal travels further before the brakes grab, and the parking brake may need excessive lever travel. Dirt, corrosion and old lubricant are common reasons an adjuster sticks.
Before replacing the screw, clean the threads, check that the star wheel turns freely and confirm the shoes are not glazed. Many brake jobs replace linings, springs and hold-down parts together, since they wear at a similar rate. Adjust the shoes carefully after installation and road test the brakes in a safe area.
- Clean and lubricate the threads before fitting
- Check the star wheel turns in both directions
- Inspect linings and springs at the same time
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | OAI16752.10 |
| Position | Rear right (passenger side) |
| Fitment type | Direct fit |
| Sold as | Individually |
| Warranty | Limited five year warranty from Omix-ADA |
Vehicle fitment
This screw fits the 1984–1989 Jeep Cherokee (XJ), 1982–1983 Jeep CJ5, 1982–1986 Jeep CJ7, 1982–1985 Jeep Scrambler and 1987–1989 Jeep Wrangler (YJ). Base, Laredo, Limited and Sport trims fit these models.
It fits the Cherokee (XJ) and Wrangler (YJ) years shown above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This screw works with the brake shoes, so its clearance setting affects how the brakes engage. Have a qualified technician set the adjuster and test the brakes before driving the vehicle.
What’s included
One self adjusting screw, sold individually.
Not included: brake shoes, springs and other drum brake hardware are not part of this item.










