Overview
The Omix-ADA 16739.01 is a driver-side self-adjusting wheel kit for 11 inch x 2 inch drum brakes, front or rear. It fits the 1972–1983 Jeep CJ5, 1972–1975 CJ6 and 1976–1986 CJ7.
The kit supplies the self-adjusting hardware for a single wheel. Omix-ADA describes its parts as direct OE replacements built to the original specifications.
Key features
- Self-adjusting wheel kit
- Driver side, front or rear
- For 11 inch x 2 inch brakes
- Direct-fit replacement design
Self-adjuster care and checks
A self-adjusting mechanism keeps the shoes close to the drum as the lining wears, so the pedal stays at a steady height. When the adjuster stops working, the pedal can drop lower than usual and the brakes may drag or pull to one side. Because the adjuster is linked to the handbrake cable and lever, the whole linkage is worth inspecting.
During service, check that the star wheel turns freely and that the cable moves without binding. Look for rust, kinks and sticky pivots, and clean them before reassembly. Replace parts that do not move smoothly, and set the initial shoe clearance before refitting the drum.
- Check the cable for rust or kinks
- Confirm the star wheel turns freely
- Lubricate pivots with brake-safe grease
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16739.01 |
| UPC | 804314072025 |
| Part type | Self-adjusting wheel kit |
| Brake size | 11 inch x 2 inch |
| Side | Driver |
| Position | Front or rear |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1972–1983 Jeep CJ5, the 1972–1975 CJ6 and the 1976–1986 CJ7.
It is made for the CJ models above. Check your year, model and trim before ordering.
What’s included
- Self-adjusting wheel kit for one driver-side brake









