Overview
The Omix-ADA 16738.01 is a drum brake hardware kit, a spring kit for 11 inch x 2 inch brakes on the front or rear axle of the 1972–1977 Jeep CJ5, 1972–1975 CJ6 and 1976–1977 CJ7.
Omix-ADA builds this kit as a direct OE replacement to original specifications, and it carries a limited five year warranty.
Key features
- Spring kit for 11 inch x 2 inch drum brakes
- Front or rear axle
- Direct-fit replacement design
- The kit carries a limited five year warranty.
Drum brake spring maintenance
Brake shoe return springs and hold-down springs keep the shoes seated against the backing plate and return them to rest after each stop. Over time heat and age weaken the coils, so a spring that has stretched or shows blue discoloration should be replaced rather than reused. Springs are usually replaced as a set on each wheel so that both shoes return evenly.
Before reassembly, clean the backing plate and check that the shoes sit freely on their pivots. Apply a thin film of brake-specific grease only to the contact points, keeping it away from the linings. After refitting, test the pedal and confirm both shoes return to their resting position when the wheel turns freely.
- Check each spring for stretching or discoloration
- Keep grease off the friction surfaces
- Confirm shoes return fully after refitting
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16738.01 |
| UPC | 804314072124 |
| Part type | Drum brake hardware (spring) kit |
| Brake size | 11 inch x 2 inch |
| Position | Front or rear axle |
| Spring type | Spring kit |
| Fit type | Direct fit |
| Warranty | Limited five year warranty. |
Vehicle fitment
It fits the 1972–1977 Jeep CJ5, the 1972–1975 CJ6 and the 1976–1977 CJ7.
The 1978 CJ5 and CJ7 model year and the CJ7 before 1976 are outside this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
- Drum brake spring hardware kit









