Overview
The Crown Automotive 943132A is a drum brake adjuster screw assembly for the passenger side, front or rear, on 11 inch brakes in the 1974–1978 Jeep CJ5, 1974–1975 CJ6 and 1976–1978 CJ7.
This part number is the passenger-side version and is supplied as a single assembly.
Key features
- Adjuster screw assembly for drum brakes
- Passenger side, front or rear
- Made for 11 inch brakes
- Direct-fit replacement design
Keeping the adjuster working
A drum brake adjuster screw sets the distance between the brake shoes and the drum. As the lining wears, the screw is turned to bring the shoes back into range, which keeps pedal travel consistent. When the screw seizes or its threads strip, the shoes can sit too far from the drum, and the pedal may feel low or soft until the brakes are readjusted.
Because the adjuster sits in the middle of the shoe assembly, it is usually inspected whenever the drums come off. Clean the threads, check that the star wheel turns freely, and look for rust, flat spots or grit. Light lubrication on the threads helps the screw move smoothly, but keep grease away from the lining surfaces. Adjust the brakes only after the shoes are seated and the drum is back on, then test the pedal before driving.
- Check that the screw turns in both directions without binding
- Look for rust or worn threads on the adjuster
- Replace shoes and springs together when the lining is worn
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 943132A |
| UPC | 848399049978 |
| Part type | Drum brake adjuster screw assembly |
| Brake size | 11 inch |
| Side | Passenger |
| Position | Front or rear |
| Fit type | Direct fit |
Vehicle fitment
The 943132A fits the 1974–1978 Jeep CJ5, the 1974–1975 CJ6 and the 1976–1978 CJ7.
Years outside 1974–1978 and models outside the CJ5, CJ6 and CJ7 are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
- One passenger-side drum brake adjuster screw assembly









